Masalah yang bersifat fatal dan parah bisa saja terjadi kapan dan di mana saja tidak memandang merk dan harga komputer pc / laptop anda. Terkadang komputer tidak bisa masuk ke windows akibat banyak hal seperti terkena virus, file booting hilang, bad sector, komputer lambat, komputer sering hang, salah seting dan berbagai masalah lainnya.
Jika berbagai cara sudah anda lakukan dan belum mendapatkan hasil yang memuaskan maka jalan pintas / singkat yang paling baik adalah dengan cara format ulang harddisk / hard drive yang ada di koputer pc / laptop anda. Pada tips ini akan diberikan beberapa langkah mudah yang dapat anda lakukan sendiri tetapi tidak secara mendetail. Bila anda butuh bimbingan anda bisa menanyakan di forum situs organisasi.org ini. Mudah-mudahan saya atau kawan lain dapat membantu anda.
A. Langkah dan Tahap Format Ulang Hard Disk
1. Back up / bekap file penting anda yang ada pada hardisk karena dengan format akan menghapus semua file yang ada di hard disk anda. Jika anda punya cd-rw drive atau dvd-rw drive anda bisa membakar file anda ke dalam cd atau dvd. Cara lain backup adalah dengan flash disk, disket floppy, disket zip, pindah file ke jaringan network lan atau internet pada komputer atau server lain dan lain-lain.
2. Setelah backup selanjutnya adalah membuat windows boot disk / rescue disk pada disket floppy 1.4 MB. Disket ini bertujuan untuk booting langsung ke disket tidak melalui harddisk anda. Istilahnya anda akan menggunakan os microsoft dos yang ada pada disket yang anda buat.
3. Ganti Setting Bios
Saat komputer dinyalakan anda harus langsung masuk ke tampilan bios untuk setting pilihan urutan boot. Caranya ketika komputer baru dinyalakan anda menekan dan menahan tombol delete sampai bios muncul di layar monitor komputer anda. Ganti urutan booting dengan urutan pertama floppy disk.
4. Format Hard Disk
Setelah bios diganti serta disave anda masukkan disket kemudian restart komputer anda. Nanti komputer anda akan otomatis boot dari disket tersebut dan pilih boot without cd-rom supaya proses booting bisa lebih cepat. Setelah masuk ke command prompt a:\ ketik format c: lalu tekan enter. Disesuaikan dengan jumlah partisi anda yang ada. Jika anda punya partisi 3 buah maka tambah perintah format d: dan format e:. Tips dan cara mempartisi hard disk mungkin bisa anda cari di kotak search di sebelah kiri halaman artikel ini. Jika format telah selsesai beri nama drive tersebut sesuai selera anda. Jika semua beres dan berjalan lancar maka proses format ulang telah selesai. Kini harddisk anda menjadi seperti baru kembali.
B. Langkah dan Tahap Install Ulang OS Windows dan Linux
1. Install Windows 98 / 2000 / ME / XP / Vista / Linux
Langkah pertama dalam mengistall ulang operating system pada komputer pc atau laptop anda adalah booting ulang ke disket anda dan pilih support cd-rom device. Setelah keluar command prompt lalu anda masukkan cd instalasi os anda sesuai selera anda. Kemudian cari drive cd-rom atau dvd-rom anda dengan mengetik d: atau e: dan lain sebagainya sesuai lokasi drive cd atau dvd rom anda. Setelah ketemu anda kemudian cari file setup.exe dengan perintah cdnama folfer untuk masuk ke dalam folder. Perintah cd.. untuk mundur satu folder level. perintah dir atau dir/w atau dir/p untuk melihat list file yang ada pada folder tersebut. Kalau sudah ketemu maka jalankan setup.exe atau install.exe dengan mengetik nama file tersebut lalu tekan tombol enter satu kali saja. Langkah berikutnya anda tinggal mengikuti perintah yang ada pada installasi cd atau dvd os.
2. Setting Settingan Boot pada Bios
Setelah install ulang windows atau linux selesai, maka keluarkan disket flopyy 1,4 anda dan masuk kembali ke menu bios setelah restart ulang. Pilih IDE-0 sebagai first boot. Floppy bisa anda seting menjadi boot kedua dan cd-rom menjadi boot ketiga. Anda bebas menentukannya sesuai dengan keinginan anda. Sehabis itu direstart ulang kembali.
3. Install Driver dan Software
Jika sudah berhasil masuk ke tampilan windows atau linux awal, selanjutnya anda nginstall driver untuk sound card, printer, scanner, kabel data, dan sebagainya sesuai hardware yang ada. Anda harus mencari dan memiliki sendiri driver tersebut. Setiap jenis komputer memiliki driver yang berbeda. Biasanya anda akan diberi cd driver saat anda membeli komputer atau hardware lainnya. Tanpa driver maka peralatan yang terhubung pada komputer laptop atau pc tidak dapat berjalan sebagaimana mestinya.
Selamat mencoba dan semoga berhasil
Rabu, 18 Mei 2011
CARA INSTALL JOOMLA
Bagaimana cara install Joomla.
1. Anda install paket apache Friends yaitu XAMPP yang di dapat di click here download
untuk paket windows, untuk pake Linux click here to download download
2. Kemudian apa bila anda sudah menginstall XAMPP,anda nyalahkan semua service nya baik
itu apache ftpzila,mysql .(untuk menginstall nya ikuti step-step nya)
3. Kemudian anda download file paket Joomla nya disini download
4. Setelah anda mendownload paket Joomla nya ada extract file paket nya tersebut ke suatu
folder,cth : Joomla, kemudian folder Joomla tersebut anda copy kan (untuk windows) ke
c:/program files/xampp/htdocs/
Untuk Linux anda buat folder baru cth: Joomla kemudian extract pekt joomla anda di
/var/www/Joomla (folder yang anda buat tadi),kemudian rubah file kepemilikan nya dengan cara :
root@linuxku:/home/aini# cd /var/www/
root@linuxku:/var/www# find /var/www/Joomla/ -type
d -exec chmod 755 {} \;
root@:/var/www# find /var/www/Joomla/ -type
f -exec chmod 644 {} \;
root@linuxku:/var/www# chown -R www-data:wwwdata
Joomla/
5. Kemudian anda buka browser anda baik itu mozilla atau IE,ketik
http://localhost:80/Joomla(sesuai folder yang anda buat tadi).Jangan lupa service apache
dan mysql nya di jalankan.
6. Maka akan tampil :
Tekan Tombol Next, maka tampil License dari Joomla:
Klik Tombol Next Lagi, maka akan tampil :
isi Hostname : localhost
isi My Sql User Name : root
password kosongkan
isi My SQL Database Name terserah anda mau buat apa, Kemudian klik tombol Next.
maka akan tampil sebagai berikut :
isikan nama situs yang ingin anda buat cth :situsku, kemudian klik tombol Next, maka akan tampil sebagai berikut :
isikan alamat email anda,dan ganti lah password nya,yang lain biarkan dalam keadaan default.
Kemudian klik tombol Next Kembali, maka akan tampil sebagai berikut :
Tanda ini berarti mengisyaratkan bahwa Joomla anda telah selesai di install,kemudian pada folder c:/program files/XAMPP/Htdocs/Joomla (folder yang anda buat) hapus, folder installation, kemudian anda buka lagi browser nya maka jalankan atau ketik http://localhost:80/Joomla, jika anda ingin meng customize situs anda maka anda tinggal pilih administrator :masukan user name :admin dan password yang telah anda isi tadi pada saat instalasi Joomla. Dan Jika anda ingin meng upload Joomla anda ke internet anda dapat menggunakan fantatisco atau ftp apa saja tergantung tempat hosting anda menyediakan nya apa. Jika anda ingin membuat situs gratis joomla anda dapat mengunjungi www.freehostia.com, utuk panduan installasi di freehostia dilain waktu aja ya,capek mau pulang dulu. Selamat mencoba dan berkarya
1. Anda install paket apache Friends yaitu XAMPP yang di dapat di click here download
untuk paket windows, untuk pake Linux click here to download download
2. Kemudian apa bila anda sudah menginstall XAMPP,anda nyalahkan semua service nya baik
itu apache ftpzila,mysql .(untuk menginstall nya ikuti step-step nya)
3. Kemudian anda download file paket Joomla nya disini download
4. Setelah anda mendownload paket Joomla nya ada extract file paket nya tersebut ke suatu
folder,cth : Joomla, kemudian folder Joomla tersebut anda copy kan (untuk windows) ke
c:/program files/xampp/htdocs/
Untuk Linux anda buat folder baru cth: Joomla kemudian extract pekt joomla anda di
/var/www/Joomla (folder yang anda buat tadi),kemudian rubah file kepemilikan nya dengan cara :
root@linuxku:/home/aini# cd /var/www/
root@linuxku:/var/www# find /var/www/Joomla/ -type
d -exec chmod 755 {} \;
root@:/var/www# find /var/www/Joomla/ -type
f -exec chmod 644 {} \;
root@linuxku:/var/www# chown -R www-data:wwwdata
Joomla/
5. Kemudian anda buka browser anda baik itu mozilla atau IE,ketik
http://localhost:80/Joomla(sesuai folder yang anda buat tadi).Jangan lupa service apache
dan mysql nya di jalankan.
6. Maka akan tampil :
Tekan Tombol Next, maka tampil License dari Joomla:
Klik Tombol Next Lagi, maka akan tampil :
isi Hostname : localhost
isi My Sql User Name : root
password kosongkan
isi My SQL Database Name terserah anda mau buat apa, Kemudian klik tombol Next.
maka akan tampil sebagai berikut :
isikan nama situs yang ingin anda buat cth :situsku, kemudian klik tombol Next, maka akan tampil sebagai berikut :
isikan alamat email anda,dan ganti lah password nya,yang lain biarkan dalam keadaan default.
Kemudian klik tombol Next Kembali, maka akan tampil sebagai berikut :
Tanda ini berarti mengisyaratkan bahwa Joomla anda telah selesai di install,kemudian pada folder c:/program files/XAMPP/Htdocs/Joomla (folder yang anda buat) hapus, folder installation, kemudian anda buka lagi browser nya maka jalankan atau ketik http://localhost:80/Joomla, jika anda ingin meng customize situs anda maka anda tinggal pilih administrator :masukan user name :admin dan password yang telah anda isi tadi pada saat instalasi Joomla. Dan Jika anda ingin meng upload Joomla anda ke internet anda dapat menggunakan fantatisco atau ftp apa saja tergantung tempat hosting anda menyediakan nya apa. Jika anda ingin membuat situs gratis joomla anda dapat mengunjungi www.freehostia.com, utuk panduan installasi di freehostia dilain waktu aja ya,capek mau pulang dulu. Selamat mencoba dan berkarya
CARA DOWNLOAD VIDEO DARI YOUTUBE
Youtube.com merupakan salah satu situs video terbesar yang ada di internet. Beragam jenis video seperti event olahraga, berita sampai video tutorial dapat Anda download secara gratis dari sana.
Untuk memudahkan Anda dalam mendownload video dari Youtube.com Anda dapat menggunakan software Youtube Downloader.
Download Video dari Youtube
Untuk mendownload caranya: pertama pilih video yang akan didownload setelah itu cari format url seperti ini:
http://www.youtube.com/watch?v=UOrcxwKAlOU
Setelah itu paste URL tersebut ke software Youtube Downloader dan klik tombol OK untuk proses download.
Setelah proses download selesai Anda bisa memutar video tersebut dengan menggunakan berbagai FLV player gratisan seperti Wimpy Desktop FLV Player, Applian FLV Player, atau menggunakan K-Lite Codec. Saya pribadi lebih suka menggunakan K-Lite Codec karena bisa digunakan juga untuk memutar hampir semua jenis file video.
Anda juga dapat mengconvert file FLV tersebut ke berbagai format video lain dengan menggunakan FLV Converter.
Untuk memudahkan Anda dalam mendownload video dari Youtube.com Anda dapat menggunakan software Youtube Downloader.
Download Video dari Youtube
Untuk mendownload caranya: pertama pilih video yang akan didownload setelah itu cari format url seperti ini:
http://www.youtube.com/watch?v=UOrcxwKAlOU
Setelah itu paste URL tersebut ke software Youtube Downloader dan klik tombol OK untuk proses download.
Setelah proses download selesai Anda bisa memutar video tersebut dengan menggunakan berbagai FLV player gratisan seperti Wimpy Desktop FLV Player, Applian FLV Player, atau menggunakan K-Lite Codec. Saya pribadi lebih suka menggunakan K-Lite Codec karena bisa digunakan juga untuk memutar hampir semua jenis file video.
Anda juga dapat mengconvert file FLV tersebut ke berbagai format video lain dengan menggunakan FLV Converter.
Senin, 16 Mei 2011
INSTALL GAME PC DENGAN DAEMON
Hampir kebanyakan game-game bajakan untuk aplikasi komputer (PC) menggunakan program pengolah image dengan nama daemon tools. terutama game-game yang sampe 2DVD lebih instaler nya. Bagi sebagian orang yang awam, menggunakan daemon agak memusingkan. so disini, saya buat cara-cara nya dengan detil. so simak ya..
Perhatikan file game yang di dalam dvd game nya. apakah dalam format kompres (rar,zip dll) atau format image. Bila dalam bentuk kompres, maka harus di ektrak dulu agar hasil nya menjadi image.
bila sudah dalam bentuk image, bisa langsung di olah pake daemon.
cara kompres file rar.
1. klik kanan salah satu file rar nya yang banyak itu, kemudian klik ektrak file. Bila di komputer anda sudah ada program kompres seperti winrar atau winzip, maka ketika klik kanan file kompres nya itu, akan muncul pilihan dari program winrar tsb. bila belom ada, bisa jg dg menggunakan bawaan dari window nya. kemudian tentukan mau di taruh di hard disk yg mana hasil ektrak itu.
2. tunggu aja proses ektrak nya dari file kompres itu selesai..., bila disuruh
masukin dvd ke dua, ya di masukin aja. trus ok dan lanjuttt...
3. hasil ektrak akan berbentuk image.
Mengolah image menggunakan daemon tool
bila di komputer blom ada program daemon, ya di instal dulu. (biasanya sudah disediakan di dalam dvd game nya). instal seperti instal biasa.
1. jalankan daemon tool nya. kemudian lihat di taskbar kmu di pojok kanan paling
bawah ada gambar petir merah. klik kiri itu, kemudian klik device.
2. browse/cari file image tadi. open.
3. instaler game nya keluar.
4. instal seperti biasa.
5. bila game pake crack, atau patch... ya di crack atau patch aja seperti biasanya.
bila instal game nya selesai, image dapat di hapus.
Perhatikan file game yang di dalam dvd game nya. apakah dalam format kompres (rar,zip dll) atau format image. Bila dalam bentuk kompres, maka harus di ektrak dulu agar hasil nya menjadi image.
bila sudah dalam bentuk image, bisa langsung di olah pake daemon.
cara kompres file rar.
1. klik kanan salah satu file rar nya yang banyak itu, kemudian klik ektrak file. Bila di komputer anda sudah ada program kompres seperti winrar atau winzip, maka ketika klik kanan file kompres nya itu, akan muncul pilihan dari program winrar tsb. bila belom ada, bisa jg dg menggunakan bawaan dari window nya. kemudian tentukan mau di taruh di hard disk yg mana hasil ektrak itu.
2. tunggu aja proses ektrak nya dari file kompres itu selesai..., bila disuruh
masukin dvd ke dua, ya di masukin aja. trus ok dan lanjuttt...
3. hasil ektrak akan berbentuk image.
Mengolah image menggunakan daemon tool
bila di komputer blom ada program daemon, ya di instal dulu. (biasanya sudah disediakan di dalam dvd game nya). instal seperti instal biasa.
1. jalankan daemon tool nya. kemudian lihat di taskbar kmu di pojok kanan paling
bawah ada gambar petir merah. klik kiri itu, kemudian klik device.
2. browse/cari file image tadi. open.
3. instaler game nya keluar.
4. instal seperti biasa.
5. bila game pake crack, atau patch... ya di crack atau patch aja seperti biasanya.
bila instal game nya selesai, image dapat di hapus.
Minggu, 24 April 2011
INSTALASI WINDOWS XP MELALUI FLASH DISK
Penginstallan windows xp dari flash disk ini juga sangat berguna untuk menginstall windows xp di beberapa notebook yang memang tidak dilengkapi dengan cd-rom seperti seri mini notebook semacam Asus Eee pc. Memang bisa diakalin dengan menginstall menggunakan external cd-rom, tapi untuk lebih menghemat kita bisa mencoba menginstall windows dengan hanya menggunakan flash disk ( harga 60 rebu juga dapat 1 biji ).
Dengan perkembangan teknologi flash disk sekarang yang memiliki kapasitas semakin besar maka kita dengan mudah bisa menggunakan flash disk untuk menginstall windows , berikut syarat2 yang harus di persiapkan .
1. Flash disk apa aja ( kalau bisa minimal 1GB ).
2. komputer korban ( victim )
3. komputer master , lengkap dengan cd-rom tentunya ( untuk membuat master flash disk )
3. cd windows xp ( asli atau palsu terserah )
4. program untuk modul installasi
- USB_PREP8 ( download via indowebster)
- PEtoUSB ( download via indowebster)
setelah pernah pernik diatas sudah siap maka langkah selanjutnya memulai installasi windows xp dari flash disk :
langkah-langkahnya sebagai berikut :
1. Colok flash disk ke komputer master dan catat posisi drivenya , apakah di F:, G:, H:, O: dan sebagainya
2. extrak file2 yang diatas , USB_PREP8 dan PEtoUSB kedalam satu folder misalkan C:/usb ( hasil extrak file USB_PREP8 jadi 1 folder, copy smua file dah pindahkan ke folder C:/usb) demikian juga file PEtoUSB.
3. Siapkan cd instalan windows xp dan masukkan ke cd rom komputer master .
4. selanjutnya buka folder C:\USB yang sudah dibuat dan berisi file2 tersebut diatas.
5. Selanjutnya jalankan file bernama “usb_prep8.bat” lalu akan muncul sebuah windows command prompt berisi bermacam2 perintah
tekan sembarang tombol aja di keyboard.
6. selanjutnya di layar komputer kamu akan muncul program PEtoUSB yang meminta untuk memformat flash disk kamu , klik start aja langsung.
7. Jika proses format sudah selesai, tutup program PEtoUSB ( jangan tutup windows command prompt usb_prep8.bat ) di layar akan muncul opsi-opsi dari 0 hingga 5.
8. Selanjutnya pilih opsi ke 1 untuk memilih sumber file installasi windows ( pilih drive cd rom kamu aja yang berisi cd installan windows ) atau juga bisa folder yang berisi file2 source instalasi windows.
9. setelah diatas , akan diminta lagi memilih opsi dan pilih opsi ke 3 untuk mentukan dimana kamu mencolokkan flash disk kamu, kalau di drive E maka ketik e dan tekan enter.
10. setelah tahap ini pilihlah opsi 4 untuk memulai proses pembuatan modul instalasi yang nantinya akan disalin ke flash disk secara otomatis. Jawab apa pun konfirmasi yang muncul dengan Y atau YES atau OK atau bentuk persetujuan lain. dalam proses ini akan memakan waktu yang cukup lama, proses pembuatan modul instalasi / pengcopyan file ke flash disk kamu ( mungkin lebih dari 15 menit )
yang sabar aja, setelah selesai sekarang kamu sudah memiliki flash disk yang bootable dan mampu menginstall windows secara langsung.
11. cabutlah flash disk dari komputer master lalu colokkan ke komputer victim untuk memulai installasi, bootlah komputer kamu dari flash disk .
lalu dilayar akan muncul 2 opsi penginstallan, pilihlah opsi yang kedua dan proses penginstalan windows akan mulai berjalan.
Rabu, 13 April 2011
INSTALASI WINDOWS XP MELALUI HARDDISK
Beberapa waktu yang lalu ada teman yang datang untuk minta bantuan. Dia barusan beli notebook baru tanpa sistem operasi. Dia sudah coba install sistem operasi Windows XP di notebooknya, namun selalu saja tidak bisa. Dia bilang setelah proses aggrement drivenya tidak terdeteksi. Akhirnya notebook tersebut sampai ke meja saya.
Awalnya saya juga mencoba melakukan hal yang sama untuk memastikan apa yang sebenarnya terjadi. Tapi rupanya yang dibilang teman saya benar adanya. Akhirnya saya coba masuk ke BIOS, cek spesifikasi dan ketemu, rupanya ini notebook pakai SATA.
Sebelumnya saya pernah install Windows XP di desktop PC dengan harddisk SATA dan berhasil. Namun saat itu saya menggunakan disket driver SATA bawaan PC. Pada kasus ini sepertinya hal tersebut tidak mungkin saya lakukan, karena disamping tidak ada driver SATA, notebook ini juga tidak memiliki disk drive.
Akhirnya saya coba googling, dan ketemu aplikasi N-lite. Dengan aplikasi ini kita bisa melakukan re-bundling Windows XP. Dengan N-lite kita bisa menambahkan option tertentu pada proses installasi, baik patching, drivers, hotfix dll.
Untuk mem-bundle ulang installer Windows XP, anda harus memiliki :
1. Installer Windows XP,
2. Driver SATA sesuai dengan spesifikasi notebook/desktop,
3. CD blank
Oke kita mulai..
Berikut langkah-langkah bundling installer Windows XP plus driver SATA:
* Jalankan aplikasi N-lite, jika belum memilikinya anda bisa download di sini, kemudian install.
* Ikuti petunjuk N-lite sampai muncul pilihan tentukan patch installer Windows XP yang anda miliki, misalnya di D:\winxp-patch. Kemudian klik Next
* N-lite akan mendeteksi installer Windows XP anda. Jika tidak ada masalah maka akan muncul informasi tentang installer yang anda gunakan. Kemudian klik Next.
* Anda akan ditanya tentang task apa saja yang ingin dilakukan.
Anda cukup memilih drivers dan bootable ISO. Namun anda juga dapat memilih task yang lain sesuai keinginan dan kebutuhan anda. Kemudian klik Next.
* Proses selanjutnya adalah menentukan dimana lokasi driver SATA yang sudah kita siapkan (sesuaikan dengan driver SATA pada notebook/desktop yang akan anda install).
Untuk memasukkan driver, anda cukup meng-klik button Insert. Anda akan ditanya apakah anda akan memasukkan hanya 1 file driver saja atau banyak driver. Dalam tulisan ini saya mengambil multiple drivers. Setelah anda memilih single driver atau multiple drivers, anda akan diminta untuk menentukan lokasi driver yang bersangkutan. Tentukan lokasi driver SATA anda, kemudian klik OK.
Setelah proses penentuan lokasi driver tadi, anda akan dihadapkan pada banyak pilihan driver SATA. Silahkan sesuaikan dengan jenis SATA anda. Jika anda tidak yakin yang mana, anda bisa memilih semua driver yang ditampilkan. Kemudian klik Next.
* N-lite akan memproses semua perubahan task yang anda inginkan. Setelah proses selesai, N-lite akan menampilkan informasi terbaru dari installer Windows XP anda setelah ditambah drivers. Kemudian klik Next.
* Proses terakhir, installer Windows XP plus Driver SATA anda siap untuk disimpan menjadi ISO file atau anda juga bisa langsung melakukan proses burning ke CD. Ingat, pilihan ini hanya akan muncul jika anda memilih bootable ISO pada proses pemilihan task sebelumnya.
* Tunggu sampai proses burning selesai.
* Sekarang anda dapat melakukan installasi Windows XP pada drive SATA anda menggunakan installer yang baru anda burning.
Awalnya saya juga mencoba melakukan hal yang sama untuk memastikan apa yang sebenarnya terjadi. Tapi rupanya yang dibilang teman saya benar adanya. Akhirnya saya coba masuk ke BIOS, cek spesifikasi dan ketemu, rupanya ini notebook pakai SATA.
Sebelumnya saya pernah install Windows XP di desktop PC dengan harddisk SATA dan berhasil. Namun saat itu saya menggunakan disket driver SATA bawaan PC. Pada kasus ini sepertinya hal tersebut tidak mungkin saya lakukan, karena disamping tidak ada driver SATA, notebook ini juga tidak memiliki disk drive.
Akhirnya saya coba googling, dan ketemu aplikasi N-lite. Dengan aplikasi ini kita bisa melakukan re-bundling Windows XP. Dengan N-lite kita bisa menambahkan option tertentu pada proses installasi, baik patching, drivers, hotfix dll.
Untuk mem-bundle ulang installer Windows XP, anda harus memiliki :
1. Installer Windows XP,
2. Driver SATA sesuai dengan spesifikasi notebook/desktop,
3. CD blank
Oke kita mulai..
Berikut langkah-langkah bundling installer Windows XP plus driver SATA:
* Jalankan aplikasi N-lite, jika belum memilikinya anda bisa download di sini, kemudian install.
* Ikuti petunjuk N-lite sampai muncul pilihan tentukan patch installer Windows XP yang anda miliki, misalnya di D:\winxp-patch. Kemudian klik Next
* N-lite akan mendeteksi installer Windows XP anda. Jika tidak ada masalah maka akan muncul informasi tentang installer yang anda gunakan. Kemudian klik Next.
* Anda akan ditanya tentang task apa saja yang ingin dilakukan.
Anda cukup memilih drivers dan bootable ISO. Namun anda juga dapat memilih task yang lain sesuai keinginan dan kebutuhan anda. Kemudian klik Next.
* Proses selanjutnya adalah menentukan dimana lokasi driver SATA yang sudah kita siapkan (sesuaikan dengan driver SATA pada notebook/desktop yang akan anda install).
Untuk memasukkan driver, anda cukup meng-klik button Insert. Anda akan ditanya apakah anda akan memasukkan hanya 1 file driver saja atau banyak driver. Dalam tulisan ini saya mengambil multiple drivers. Setelah anda memilih single driver atau multiple drivers, anda akan diminta untuk menentukan lokasi driver yang bersangkutan. Tentukan lokasi driver SATA anda, kemudian klik OK.
Setelah proses penentuan lokasi driver tadi, anda akan dihadapkan pada banyak pilihan driver SATA. Silahkan sesuaikan dengan jenis SATA anda. Jika anda tidak yakin yang mana, anda bisa memilih semua driver yang ditampilkan. Kemudian klik Next.
* N-lite akan memproses semua perubahan task yang anda inginkan. Setelah proses selesai, N-lite akan menampilkan informasi terbaru dari installer Windows XP anda setelah ditambah drivers. Kemudian klik Next.
* Proses terakhir, installer Windows XP plus Driver SATA anda siap untuk disimpan menjadi ISO file atau anda juga bisa langsung melakukan proses burning ke CD. Ingat, pilihan ini hanya akan muncul jika anda memilih bootable ISO pada proses pemilihan task sebelumnya.
* Tunggu sampai proses burning selesai.
* Sekarang anda dapat melakukan installasi Windows XP pada drive SATA anda menggunakan installer yang baru anda burning.
Kamis, 07 April 2011
INSTAL WINDOWS SERVER 2003
Step #1: Plan your installation
When you run the Windows Server 2003 Setup program, you must provide information about how to install and configure the operating system. Thorough planning can make your installation of Windows Server 2003 more efficient by helping you to avoid potential problems during installation. An understanding of the configuration options will also help to ensure that you have properly configured your system.
I won't go into that part right now (I might later this month, no promises...) but here are some of the most important things you should take into consideration when planning for your Windows Server 2003 installation:
Check System Requirements
Check Hardware and Software Compatibility
Determine Disk Partitioning Options
Choose the Appropriate File System: FAT, FAT32, NTFS
Decide on a Workgroup or Domain Installation
Complete a Pre-Installation Checklist
After you made sure you can go on, start the installation process.
Step #2: Beginning the installation process
You can install Windows Server 2003 in several methods - all are valid and good, it all depends upon your needs and your limitations.
For example, you can install directly from a CD by booting your computer with the CD, or you can also copy the I386 folder from a CD and run the setup process by going into the I386 folder and using the WINNT or WINNT32 command (depending upon your existing operating system).
It doesn't matter how you run the setup process, but the moment it runs - all setup methods look alike.
Step #3: The text-based portion of the Setup program
The setup process begins loading a blue-looking text screen (not GUI). In that phase you will be asked to accept the EULA and choose a partition on which to install 2003, and if that partition is new, you'll be asked to format it by using either FAT, FAT32 or NTFS.
Start the computer from the CD.
You can press F6 if you need to install additional SCSI adapters or other mass-storage devices. If you do you will be asked to supply a floppy disk with the drivers and you CANNOT browse it (or a CD for that matter). Make sure you have one handy.
If you want, you can press F2 to run the ASR sequence. For that you need a good backup created by the Windows Server 2003 backup program, and the ASR floppy disk. If you plan to install a new copy of 2003 - don't do anything.
Setup will load all the needed files and drivers.
Select To Setup Windows Server 2003 Now. If you want, and if you have a previous installation of the OS, you can try to fix it by pressing R. If not, just press ENTER.
Read and accept the licensing agreement and press F8 if you accept it.
Select or create the partition on which you will install Windows Server 2003. Depending upon your existing disk configuration choose one of the following:
If the hard disk is unpartitioned, you can create and size the partition on which you will install Windows Server 2003.
If the hard disk is already partitioned, but has enough unpartitioned disk space, you can create an additional partition in the unpartitioned space.
If the hard disk already has a partition that is large enough, you can install Windows Server 2003 on that partition. If the partition has an existing operating system, you will overwrite that operating system if you accept the default installation path. However, files other than the operating system files, such as program files and data files, will not be overwritten.
If the hard disk has an existing partition, you can delete it to create more unpartitioned space for the new partition. Deleting an existing partition erases all data on that partition.
If you select a new partition during Setup, create and size only the partition on which you will install Windows Server 2003. After installation, use Disk Management to partition the remaining space on the hard disk.
Select a file system for the installation partition. After you create the partition on which you will install Windows Server 2003, you can use Setup to select the file system with which to format the partition. Windows Server 2003 supports the NTFS file system in addition to the file allocation table (FAT) and FAT32 file systems. Windows Server 2003, Windows XP Professional, Windows 2000, and Windows NT are the only Microsoft operating systems that you can use to gain access to data on a local hard disk that is formatted with NTFS. If you plan to gain access to files that are on a local Windows Server 2003 partition with the Microsoft Windows 95 or Windows 98 operating systems, you should format the partition with a FAT or FAT32 file system. We will use NTFS.
Setup will then begin copying necessary files from the installation point (CD, local I386 or network share).
Note: If you began the installation process from an MS-DOS floppy, make sure you have and run SMARTDRV from the floppy, otherwise the copying process will probably last more than an hour, perhaps even more. With SMARTDRV (or if setup was run by booting from CD) the copying will probably last a few minutes, no more than 5 max.
The computer will restart in graphical mode, and the installation will continue.
Step #4: The GUI-based portion of the Setup program
The setup process reboots and loads a GUI mode phase.
It will then begin to load device drivers based upon what it finds on your computer. You don't need to do anything at this stage.
Click Customize to change regional settings, if necessary.
Current System Locale - Affects how programs display dates, times, currency, and numbers. Choose the locale that matches your location, for example, French (Canada).
Current Keyboard Layout - Accommodates the special characters and symbols used in different languages. Your keyboard layout determines which characters appear when you press keys on the keyboard.
If you don't need to make any changes just press Next.
If you do need to make changes press Customize and add your System Locale etc.
Note for Hebrew users: Unlike W2K, it is SAFE and it is OK for you to install Hebrew language support at this phase.
To install Hebrew support:
After pressing Customize go to the Languages tab and select the "Install files for complex script and right-to-left languages".
A warning message will appear. Press Ok.
Warning: You must now press Apply!!!
Setup will copy the necessary files from the installation point.
You can now go to the Regional Options tab and select Israel in the Location drop-down list, and Hebrew in the Standards and Formats drop-down list. Click Ok.
Note: Read the Install Hebrew on Windows Server 2003 page for more info.
Type your name and organization.
Type the product key.
Enter the appropriate license type and number of purchased licenses.
Type the computer name and a password for the local Administrator account. The local Administrator account resides in the SAM of the computer, not in Active Directory. If you will be installing in a domain, you need either a pre-assigned computer name for which a domain account has been created, or the right to create a computer account within the domain.
If you enter a password that is blank or does not match the required complexity settings you will get a warning message.
Select the date, time, and time zone settings.
Setup will now install the networking components.
After a few seconds you will receive the Networking Settings window. BTW, if you have a NIC that is not in the HCL (see the What's the HCL? page) and Windows Server 2003 cannot detect it, or if you don't have a NIC at all, setup will skip this step and you will immediately go to the final phase of the setup process.
Press Next to accept the Typical settings option if you have one of the following situations:
You have a functional DHCP on your network.
You have a computer running Internet Connection Sharing (ICS).
You're in a workgroup environment and do not plan to have any other servers or Active Directory at all, and all other workgroup members are configured in the same manner.
Otherwise select Custom Settings and press Next to customize your network settings.
Highlight the TCP/IP selection and press Properties.
In the General tab enter the required information. You must specify the IP address of the computer, and if you don't know what the Subnet Mask entry should be - you can simply place your mouse pointer over the empty area in the Subnet Mask box and click it. The OS will automatically select the value it thinks is good for the IP address you provided.
If you don't know what these values mean, or if you don't know what to write in them, press cancel and select the Typical Settings option. You can easily change these values later.
In the Workgroup or Domain window enter the name of your workgroup or domain.
A workgroup is a small group of computers on a network that enables users to work together and does not support centralized administration.
A domain is a logical grouping of computers on a network that has a central security database for storing security information. Centralized security and administration are important for computers in a domain because they enable an administrator to easily manage computers that are geographically distant from each other. A domain is administered as a unit with common rules and procedures. Each domain has a unique name, and each computer within a domain has a unique name.
If you're a stand-alone computer, or if you don't know what to enter, or if you don't have the sufficient rights to join a domain - leave the default entry selected and press Next.
If you want to join a domain (NT 4.0 domain of W2K/2003 Active Directory domain) enter the domain's name in the "Yes, make this computer a member of the following domain" box.
To successfully join a domain you need the following:
The person performing the installation must have a user account in Active Directory. This account does not need to be the domain Administrator account.
and
The computer must have an existing computer account in the Active Directory database of the domain that the computer is joining, and the computer must be named exactly as its domain account is named.
or
The person performing the installation must have appropriate permission to create a domain account for the computer during installation.
Also, you need to have connectivity to the domain's domain controllers (only to the PDC if on an NT 4.0 domain) and a fully functional DNS server (only in AD domains). Read the Joining a Domain in Windows XP Pro and Requirements when Joining a Domain pages for more on this issue.
Enter the Active Directory domain name (in the form of xxx.yyy, for example: DPETRI.NET) or the NetBIOS name of the NT 4.0 domain (in the form of xxx, for example: DPETRI). Press Next.
Note: If you provide a wrong domain name or do not have the correct connectivity to the domain's DNS server you will get an error message.
A username/password window will appear. Enter the name and password of the domain's administrator (or your own if you're the administrator on the target domain).
Note: Providing a wrong username or password will cause this phase to fail.
Next the setup process will finish copying files and configuring the setup. You do not need to do anything.
After the copying and configuring phase is finished, if Windows Server 2003 finds that you have a badly configured screen resolution it will advise you to change it and ask you if you see the new settings right.
BTW, the minimum supported screen resolution in 2003 is 800X600.
Setup finishes and boots Windows Server 2003.
When you run the Windows Server 2003 Setup program, you must provide information about how to install and configure the operating system. Thorough planning can make your installation of Windows Server 2003 more efficient by helping you to avoid potential problems during installation. An understanding of the configuration options will also help to ensure that you have properly configured your system.
I won't go into that part right now (I might later this month, no promises...) but here are some of the most important things you should take into consideration when planning for your Windows Server 2003 installation:
Check System Requirements
Check Hardware and Software Compatibility
Determine Disk Partitioning Options
Choose the Appropriate File System: FAT, FAT32, NTFS
Decide on a Workgroup or Domain Installation
Complete a Pre-Installation Checklist
After you made sure you can go on, start the installation process.
Step #2: Beginning the installation process
You can install Windows Server 2003 in several methods - all are valid and good, it all depends upon your needs and your limitations.
For example, you can install directly from a CD by booting your computer with the CD, or you can also copy the I386 folder from a CD and run the setup process by going into the I386 folder and using the WINNT or WINNT32 command (depending upon your existing operating system).
It doesn't matter how you run the setup process, but the moment it runs - all setup methods look alike.
Step #3: The text-based portion of the Setup program
The setup process begins loading a blue-looking text screen (not GUI). In that phase you will be asked to accept the EULA and choose a partition on which to install 2003, and if that partition is new, you'll be asked to format it by using either FAT, FAT32 or NTFS.
Start the computer from the CD.
You can press F6 if you need to install additional SCSI adapters or other mass-storage devices. If you do you will be asked to supply a floppy disk with the drivers and you CANNOT browse it (or a CD for that matter). Make sure you have one handy.
If you want, you can press F2 to run the ASR sequence. For that you need a good backup created by the Windows Server 2003 backup program, and the ASR floppy disk. If you plan to install a new copy of 2003 - don't do anything.
Setup will load all the needed files and drivers.
Select To Setup Windows Server 2003 Now. If you want, and if you have a previous installation of the OS, you can try to fix it by pressing R. If not, just press ENTER.
Read and accept the licensing agreement and press F8 if you accept it.
Select or create the partition on which you will install Windows Server 2003. Depending upon your existing disk configuration choose one of the following:
If the hard disk is unpartitioned, you can create and size the partition on which you will install Windows Server 2003.
If the hard disk is already partitioned, but has enough unpartitioned disk space, you can create an additional partition in the unpartitioned space.
If the hard disk already has a partition that is large enough, you can install Windows Server 2003 on that partition. If the partition has an existing operating system, you will overwrite that operating system if you accept the default installation path. However, files other than the operating system files, such as program files and data files, will not be overwritten.
If the hard disk has an existing partition, you can delete it to create more unpartitioned space for the new partition. Deleting an existing partition erases all data on that partition.
If you select a new partition during Setup, create and size only the partition on which you will install Windows Server 2003. After installation, use Disk Management to partition the remaining space on the hard disk.
Select a file system for the installation partition. After you create the partition on which you will install Windows Server 2003, you can use Setup to select the file system with which to format the partition. Windows Server 2003 supports the NTFS file system in addition to the file allocation table (FAT) and FAT32 file systems. Windows Server 2003, Windows XP Professional, Windows 2000, and Windows NT are the only Microsoft operating systems that you can use to gain access to data on a local hard disk that is formatted with NTFS. If you plan to gain access to files that are on a local Windows Server 2003 partition with the Microsoft Windows 95 or Windows 98 operating systems, you should format the partition with a FAT or FAT32 file system. We will use NTFS.
Setup will then begin copying necessary files from the installation point (CD, local I386 or network share).
Note: If you began the installation process from an MS-DOS floppy, make sure you have and run SMARTDRV from the floppy, otherwise the copying process will probably last more than an hour, perhaps even more. With SMARTDRV (or if setup was run by booting from CD) the copying will probably last a few minutes, no more than 5 max.
The computer will restart in graphical mode, and the installation will continue.
Step #4: The GUI-based portion of the Setup program
The setup process reboots and loads a GUI mode phase.
It will then begin to load device drivers based upon what it finds on your computer. You don't need to do anything at this stage.
Click Customize to change regional settings, if necessary.
Current System Locale - Affects how programs display dates, times, currency, and numbers. Choose the locale that matches your location, for example, French (Canada).
Current Keyboard Layout - Accommodates the special characters and symbols used in different languages. Your keyboard layout determines which characters appear when you press keys on the keyboard.
If you don't need to make any changes just press Next.
If you do need to make changes press Customize and add your System Locale etc.
Note for Hebrew users: Unlike W2K, it is SAFE and it is OK for you to install Hebrew language support at this phase.
To install Hebrew support:
After pressing Customize go to the Languages tab and select the "Install files for complex script and right-to-left languages".
A warning message will appear. Press Ok.
Warning: You must now press Apply!!!
Setup will copy the necessary files from the installation point.
You can now go to the Regional Options tab and select Israel in the Location drop-down list, and Hebrew in the Standards and Formats drop-down list. Click Ok.
Note: Read the Install Hebrew on Windows Server 2003 page for more info.
Type your name and organization.
Type the product key.
Enter the appropriate license type and number of purchased licenses.
Type the computer name and a password for the local Administrator account. The local Administrator account resides in the SAM of the computer, not in Active Directory. If you will be installing in a domain, you need either a pre-assigned computer name for which a domain account has been created, or the right to create a computer account within the domain.
If you enter a password that is blank or does not match the required complexity settings you will get a warning message.
Select the date, time, and time zone settings.
Setup will now install the networking components.
After a few seconds you will receive the Networking Settings window. BTW, if you have a NIC that is not in the HCL (see the What's the HCL? page) and Windows Server 2003 cannot detect it, or if you don't have a NIC at all, setup will skip this step and you will immediately go to the final phase of the setup process.
Press Next to accept the Typical settings option if you have one of the following situations:
You have a functional DHCP on your network.
You have a computer running Internet Connection Sharing (ICS).
You're in a workgroup environment and do not plan to have any other servers or Active Directory at all, and all other workgroup members are configured in the same manner.
Otherwise select Custom Settings and press Next to customize your network settings.
Highlight the TCP/IP selection and press Properties.
In the General tab enter the required information. You must specify the IP address of the computer, and if you don't know what the Subnet Mask entry should be - you can simply place your mouse pointer over the empty area in the Subnet Mask box and click it. The OS will automatically select the value it thinks is good for the IP address you provided.
If you don't know what these values mean, or if you don't know what to write in them, press cancel and select the Typical Settings option. You can easily change these values later.
In the Workgroup or Domain window enter the name of your workgroup or domain.
A workgroup is a small group of computers on a network that enables users to work together and does not support centralized administration.
A domain is a logical grouping of computers on a network that has a central security database for storing security information. Centralized security and administration are important for computers in a domain because they enable an administrator to easily manage computers that are geographically distant from each other. A domain is administered as a unit with common rules and procedures. Each domain has a unique name, and each computer within a domain has a unique name.
If you're a stand-alone computer, or if you don't know what to enter, or if you don't have the sufficient rights to join a domain - leave the default entry selected and press Next.
If you want to join a domain (NT 4.0 domain of W2K/2003 Active Directory domain) enter the domain's name in the "Yes, make this computer a member of the following domain" box.
To successfully join a domain you need the following:
The person performing the installation must have a user account in Active Directory. This account does not need to be the domain Administrator account.
and
The computer must have an existing computer account in the Active Directory database of the domain that the computer is joining, and the computer must be named exactly as its domain account is named.
or
The person performing the installation must have appropriate permission to create a domain account for the computer during installation.
Also, you need to have connectivity to the domain's domain controllers (only to the PDC if on an NT 4.0 domain) and a fully functional DNS server (only in AD domains). Read the Joining a Domain in Windows XP Pro and Requirements when Joining a Domain pages for more on this issue.
Enter the Active Directory domain name (in the form of xxx.yyy, for example: DPETRI.NET) or the NetBIOS name of the NT 4.0 domain (in the form of xxx, for example: DPETRI). Press Next.
Note: If you provide a wrong domain name or do not have the correct connectivity to the domain's DNS server you will get an error message.
A username/password window will appear. Enter the name and password of the domain's administrator (or your own if you're the administrator on the target domain).
Note: Providing a wrong username or password will cause this phase to fail.
Next the setup process will finish copying files and configuring the setup. You do not need to do anything.
After the copying and configuring phase is finished, if Windows Server 2003 finds that you have a badly configured screen resolution it will advise you to change it and ask you if you see the new settings right.
BTW, the minimum supported screen resolution in 2003 is 800X600.
Setup finishes and boots Windows Server 2003.
Langganan:
Postingan (Atom)